Lawn Land

  • 714 Dallas Dr.
  • Denton, TX 76205
  • Call Us: (940) 566-1142
  • https://www.lawnland.net/
Print This Page

2025 John Deere 1580 TerrainCut™ 72 in. 7-Iron™ PRO side discharge

Information

2025 John Deere 1580 TerrainCut™ 72 in. 7-Iron™ PRO side discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or FASTBACK™ Rear Discharge Deck

Diesel Engine

Compatible with select front blade, snow blower and broom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20. The 1550 model requires.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing
  • Automotive-type alternator for plenty of charge to the battery and power for accessories
  • 75 amp for open-station models
  • 95 amp for ComfortCab models
  • Automatic initiation of air heater for easier cold-weather starting
  • Automotive-sensing system tells operator when engine is ready to start
  • Fuel tank features:

Photos

Highlights

  • Denton, Texas
  • 2025
  • John Deere
  • 1580 TerrainCut™ 72 in. 7-Iron™ PRO side discharge
  • Hydrostatic full time 4WD, on-demand
  • Diesel (B20 compatible)
  • Available
  • Cutting: 1-6 in. 2.54-15.24 cm

Specifications

  • 2025
  • John Deere
  • 1580 TerrainCut™
  • 72 in. 7-Iron™ PRO side discharge
  • Riding
  • 3TNV88C
  • Gross PS: 37.4 hp 27.5 kW
  • 3,000 rpm
  • Three
  • 100.2 cu in. 1.64 L
  • Liquid
  • Dual element dry type | Air restriction indicator: Standard
  • Direct
  • At 1,950 rpm: 80.4 lb-ft 109 Nm
  • Diesel (B20 compatible)
  • Hydrostatic full time 4WD, on-demand
  • Speed and direction control: Two-pedal foot | Hi/Lo range: No, single speed transmission
  • Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
  • Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking
  • Drive: 26x12-12 | Steering: 20x10-10
  • Type Flat free Size 11x4-5
  • 12 V
  • 75 amp
  • Automotive type
  • Travel speed: Hi forward: 0-15 mph 0-24 km/h / Hi reverse: 0-5 mph 0-8 km/h | Speed range: 0-15 mph 0-24 km/h | Blade tip speed: 18,000 fpm 5,486 m/min
  • 6.3 U.S. gpm 23.8 L/min
  • Open center | Spool valve: Front lift, standard
  • Two
  • Mower deck size: 72 in. 183 cm
  • Less mower deck: 86.7 in. 220.2 cm
  • Cutting: 1-6 in. 2.54-15.24 cm
  • with ROPS: 83.7 in. 213 cm | with ROPS folded: 59 in. 150 cm
  • Narrow Width 26x12 tires: 55.4 in. 140.7 cm Wide | Width 26x12 tires: 60.3 in. 153.2 cm
  • 72 in. 183 cm
  • 7 in. 17.8 cm
  • 49.2 in. 125 cm
  • 7 gauge 0.180 in. 4.6 mm
  • Tank: 16 U.S. gal. 60.6 L
  • ROPS: Factory installed ComfortCab™
  • Net weight without mower or fuel: 2,120 lb 962 kg
  • One-piece stamped steel; 7-Iron PRO
  • 24 months